Alternative Electrical Energy 2017 and Onsite Wattage Loads

Any AC electrical power usage consumes wattage for operation cycle an example of this is turn any AC load off or on and wattage is being consumed. Every onsite AC electrical power usage is different for each off grid or grid tied location because of the needed wattage to operate total onsite wattage usage and needs.

Grid tied customers have a much better advantage when considering lowering or eliminating their monthly billing as the KW or Kwh gives a better understanding needed to adjust those numbers into a alternative electrical energy system for their onsite wattage needs. Off grid and remote alternative
electric energy is as simple as spread sheeting every intend AC or DC device to be operated and matching those numbers for the required onsite system.

Grid quality AC single and three phase electrical power energy can be matched by alternative electrical energy that is also grid quality. It never has been so reliable and easy to make alternative electrical energy than it is right now today with the advancement in microprocessor controlled devices.

 Alternative electrical power can be achieved by anyone that wants to invest into a system that pays for itself by lowering or eliminating grid tied monthly billing. There are many off the shelf vendors worldwide that offer grid quality products that are designed to be mixed and matched with other vendors products of the same grid quality standards.  This allows systems to start small and as funding allows keep adding to meet the final onsite system needs.

Alternative electrical energy is no more than adding up your wattage loads and designing the required system that can meet or exceed those required wattage loads. The higher the voltage the less the amperage draw for the same wattage being operated gives the best yields possible for alternative electrical energy . Todays 2 main solar panel types are DC charging to battery bank control and AC no batteries required that tie direct into AC electrical circurit breakers. Wind power even in small systems are all ready 1 or 3 phase AC and have to be rectified down to DC voltage for charging.

Combining and making these various alternative electrical energy devices play together nicely is achieved effortlessly with PLC (programmable logic controller) and SCADA software.
This mixing and matching of various grid quality vendors products can be achieved by adding any alternative electrical energy source for charging solar, wind, hydro. Combining all these switching sources from alternative energy produces microgrid electrical power energy in a wide range of voltage and wattage requirements in either 50 or 60 hertz.

The benefits are endless when it comes to alternative electrical energy and AC electrical power with microprocessor control. Consulting clients worldwide on alternative electrical energy power in either grid tied or off grid systems by a retired master electrician with over 43 years experience.

www.dbelectric.us